Catalog Simulator Wishlist Quotation
LIMES OF TOUR2017-09-30T11:32:32+00:00

Limes of tour


Cement Tiles of Tour brings a new dimension to interior and exterior finishes using natural products which are easy to apply.

Hand-made by craftsmen, the range is based around three minerals: limestone, cement and clay. We offer a rich palette of 144 colours, ranging from white through grey, to a variety of beiges and ochres, so you really can select the décor to suit your home or office environment.

The lime paint is a traditional wall lining containing diluted lime and of mineral pigments. Its moire texture and its effects bring to your walls a key of colors subtle and authentic.

Download the technical data(pdf) : advices_lime -LIME PAINTS

DEFINITION : Completion with lime for outside and interior.

DESCRIPTION : Past lends to employment containing extinct soft lime, load, dyes mineral, auxilary. SAFETY : Contains calcium hydroxide, irritating for the eyes and the skin and involving risks of ocular lesions serious, in handling and the use to follow the instructions marked on packing. Conservation : 1 year in packing of origin, stored between +5°C and + 40°C. Conditioning: Plastic buckets of 25 kg Types : The product is provided in the colors of the nuancier, Code Consommation satin EX 2 kg/m 2 Rustic end F 2,5 – 3,0 kg/m 2.

SUPPORTS : Lime plaster applies outside and inside to all slightly granulous mineral supports, other than the plaster (v particular cases). The supports must be homogeneous in hardness and absorption. In the contrary case it is advisable to fix them with a setting coat mortar high performance, compatible. This type of application is recognized like “traditional technique”.

APPLICATION :
To work under normal climatic conditions, except bad weather, between + 5°C and + 35°C.

– To mix lime plaster and to just as it is apply it, after abundant humidification of the support.
– To apply to the smoothing machine stainless on the two ways.
– To pass a layer on the preceding one as soon as this one starts to take If a layer is dry to humidify it before passing the following one. As soon as the final layer starts to take, smooth with the hawk or frottassé with sponge or a bag, etc.
– It is possible also, in the same way, to smooth/shoe/freeze/the final layer with a small rectangular stainless smoothing machine; the door-fitting reduces the permeability to the vapor slightly. In top coat not to use buckets of different batches on the same frontage.

Particular case:
– In cold and wet atmosphere: it is recommended to add in first layer, after malaxation, 1,5 kg of white cement per bucket of 25 kg lime plaster, not to add cement on the way of completion.
– For nonhomogeneous support but of flatness in conformity, it is advisable to apply in under layer a master key of under layer (very permeable with the steam).
– In polluting medium or on walls badly protected the top, it is recommended to add a final protection to siloxane, very permeable with the steam but impermeable to the rain.

Our coating of lime are a subtle balance between modernity and tradition, without compromise with respect to the environment and of health. They will enable you to bring a real identity to your interiors.

Download the technical data (pdf): advices_coating-of-lime

LIME PLASTER DEFINITION : Finishing coat to lime for outside and interior :

chaux de la tour

SAFETY : Contains calcium hydroxide, irritating for the eyes and the skin and involving risks of ocular lesions serious, in handling and the use to follow the instructions marked on packing.

CONSERVATION : 1 year in packing of origin, stored between +5°C and + 40°C

CONDITIONING: Plastic buckets of 25 kg

TYPES : The product is provided in the colors of the nuancier, Code Consommation satin EX 2 kg/m 2 Rustic end F 2,5 – 3,0 kg/m 2

chaux

SUPPORTS : Lime plaster applies outside and inside to all slightly granulous mineral supports, other than the plaster (v particular cases). The supports must be homogeneous in hardness and absorption. In the contrary case it is advisable to fix them with a setting coat mortar high performance, compatible. This type of application is recognized like “traditional technique”.

APPLICATION : To work under normal climatic conditions, except bad weather, between + 5°C and + 35°C.

1/To mix lime plaster and to just as it is apply it, after abundant humidification of the support.
2/To apply to the smoothing machine stainless on the two ways.
3/To pass a layer on the preceding one as soon as this one starts to take If a layer is dry to humidify it before passing the following one. As soon as the final layer starts to take, smooth with the hawk or frottassé with sponge or a bag, etc.
4/It is possible also, in the same way, to smooth/shoe/freeze/the final layer with a small rectangular stainless smoothing machine; the door-fitting reduces the permeability to the vapor slightly. In top coat not to use buckets of different batches on the same frontage.

Particular case:
– In cold and wet atmosphere: it is recommended to add in first layer, after malaxation, 1,5 kg of white cement per bucket of 25 kg lime plaster, not to add cement on the way of completion.
– For nonhomogeneous support but of flatness in conformity, it is advisable to apply in under layer a master key of under layer (very permeable with the steam).
– In polluting medium or on walls badly protected the top, it is recommended to add a final protection to siloxane, very permeable with the steam but impermeable to the rain.

Offering the aspect of a traditional tadelakt, this decorative coating, containing lime surprises by its simplicity of implementation.

All the parts of the house can adopt it, including the water parts as well as the walls of shower.

chaux effet taddelakt

chaux effet taddelakt chaux effet taddelakt chaux effet taddelakt chaux effet taddelakt

Download technical data (pdf): advices_tadelak

DEFINITION : Decorative stucco with lime for purpose “Taddelakt”

DESCRIPTION : Paste containing extinct soft lime, loads, dyes mineral, auxiliary.

SAFETY: Contains calcium hydroxide, irritating for the eyes and the skin and involving risks of ocular lesions serious, in handling and the use to follow the instructions marked on packing.

CONSERVATION: 1 year in packing of origin, stored between +5°C and + 40°C

CONDITIONING: Plastic buckets of 5 K Types: The product is provided in the colors of the nuancier, Code Consommation TD 0,4-0,5 kg/m2

SUPPORTS: The completion taddelakt effect applies to a bottom of lime plaster standard EX shoed (for the application to see the card lime plaster). The coating applies outside and inside to all slightly granulous supports, other than the plaster (v particular cases). The supports must be homogeneous in hardness and absorption. In the contrary case it is advisable to fix them with a setting coat mortar high performance, compatible. This type of application is recognized like “traditional technique”.

APPLICATION:
– To work under normal climatic conditions, except bad weather, between + 5°C and + 35°C.
– Application of lime plaster of the shoed type EX, to the colour (v card of lime plaster of the shoed type EX).
– To mix the completion taddelakt effect and to just as it is apply it, after humidification of the bottom. To apply to the smoothing machine stainless on the two ways, at least. To shoe each master key carefully, if the layer is too dry to slightly humidify it before shoeing it. To pass a layer on the preceding one, as soon as this one starts to take, sprinkle the wall between a master key and the other. Not to use buckets of different batches on the same frontage.
– After drying, if surface is not polished enough to gloss it with fine steel wool (n°000).
– To pass wax to the spatula stainless and to shoe. Output 10 m2 /litre.

The old Ochres, of the dark red to the gold yellow became matters and offer to us through these coatings of Provence of, waxed, shoed, of possibilities of aspect ad infinitum, waterproofed the cordial interiors or glossed, all that for the pleasure of a personalized environment, within an intimate and cordial framework.

enduit à l'ancienne enduit à l'ancienne enduit à l'ancienne enduit à l'ancienne enduit à l'ancienne

Download technical data (pdf): advices_old-coating

APPLICATION: With the trowel, the smoothing machine at the blunted edges, or the spatula, according to the required completion.
In an application, to spread out the mixture in a a little irregular way without to want to smooth it.

For the people who wish an aspect “walls old”, to let dry without smoothing. For those which wish a smooth aspect, to let harden product 10 to 15 minutes according to the temperature, then to smooth dry for a partially uniform effect, while wetting for a moderate effect. For the not tested people, it is advised to carry out a test and to let dry a few days to see the final color.

To the attention of the professionals: to avoid the crossed, vertical and horizontal layers. This product is not a coating of smoothing not more than one under unspecified layer or a painting. The effects are in the matter, to avoid tiring the product, to apply a layer a sufficient thickness.

Not to triturate it to make of it a paste as for a fatty coating or of smoothing. The coating is a simple product which does not require to be worked over again. However it is possible to smooth the second application, but in all the cases, before undertaking important building sites, tests for defines and to confirm the final colors are desirable.

THICKNESS : From 1 to 3 mm on average, however, the coating makes it possible to catch up with the inequalities (but not to stop) cracks going from 10 to 15 mm before the first application).

OEUVRABILITE : 30 mn, once mixed with water. A council: to avoid adding water to lengthen the product at the end of the mess tin.

DRYING : On the very porous supports, the coating is hard in one hour. The coating is regarded as dryness only after having taken its final color, i.e. between 2 to 4 days, according to the porosity of the support, the temperature, and, or, the moisture of the part, however on the printed walls drying is slower.

CONSUMPTION : 15 liters of dry product make it possible to cover with 8 to 10 m 2 (average consumption for standardized support), depending on the state of the walls and the skill of the applicator.

COMPLETION : Once dry, the coating can, be waxed, polished, be patinated or shoed for an effect “stucco” all the techniques of patinas are possible, it can also be waterproofed for a use in the water parts. To pass the vacuum cleaner before any treatment. For a completion and any treatment, the imperative condition is that the coating is absolutely dry and free from dust.

COLORS NUANCES VARIATIONS : The product was thought to return an effect of old wall, nonuniform, very moderate.

Decorative acrylic bonding system for interior, walls and joinery.

      

The Unctuous Mat is a microporous acrylic paint. Applies to exterior and interior. Suitable for new and renovation works. The Unctuous Mat has a slightly granite and deep matt appearance Identity Pulp composed of: acrylic resin in aqueous dispersion, mineral fillers, light-resistant pigments, additives, bactericides, water repellents.

The ground coatings are coatings 100% natural. They are containing ground, of clay of various selected colors and several fine sand, intended for the completion and the decoration of interiors of dwellings and offices.